We check the elements, switches, wiring and controls to find the real source of the problem.
Local stove and cooktop service in Edmonton and nearby areas
Stove & Cooktop
Repair in Edmonton
A burner that won't heat, an element stuck on high or controls that stop responding make everyday cooking difficult and unsafe. When your stove or cooktop isn't working the way it should, you need fast and reliable help. At Dr. Appliance Fix, our experienced technicians provide prompt stove and cooktop repair services across Edmonton, Sherwood Park, Acheson, and Spruce Grove.
Interactive guide
Which Problems Do We Fix in stoves and cooktops?
These are possible causes, not a remote diagnosis. A technician can check the appliance and explain the actual fault.
Problem 01
A Burner or Element Won't Heat
If one coil element stays cold, try swapping it with another of the same size. If it works in the other spot, the receptacle or wiring is the issue; if it still doesn't heat, the element is likely burnt out. On glass cooktops, a radiant element that won't heat often points to a failed element, an infinite switch, or a control board problem.
Arrange a diagnosis
Problem 02
The Element Stays on High or Won't Turn Off
An element that glows red no matter where the knob is set, or keeps heating after you turn it off, is a safety concern. It is often caused by a failed infinite switch, which controls how much power the element receives, or by a stuck relay on the control board. Turn the power off at the breaker and don't use that element until it is repaired.
Arrange a diagnosis
Problem 03
Uneven or Weak Heat
If water takes much longer to boil or pans heat unevenly, the element may be wearing out or not making good contact. Coil elements need to sit flat in their receptacles, and warped cookware can also heat unevenly. A failing infinite switch or a loose connection can keep the element from reaching full power.
Arrange a diagnosis
Problem 04
Cracked or Damaged Glass Cooktop
A crack in a glass cooktop is more than a cosmetic problem. Spills can reach the elements and wiring underneath, which creates a risk of electric shock. Stop using the cooktop and turn off the power until it has been inspected. In most cases, the glass top is replaced as a complete panel.
Arrange a diagnosis
Problem 05
Touch Controls Not Responding
If the touch panel ignores your input, check that the control lock isn't on and wipe the surface clean and dry, since moisture and residue can confuse the sensors. Turning off the breaker for a minute can reset some faults. If the controls still don't respond, the touch control board or its wiring may need repair.
Arrange a diagnosis
Problem 06
Induction Cooktop Doesn't Detect the Pan
Induction cooktops only heat magnetic cookware. If a magnet doesn't stick firmly to the bottom of your pan, it won't work on induction. Pans that are too small or not centred may also go undetected. If proper cookware still shows an error or doesn't heat, a faulty induction coil, sensor, or power board may be the cause.
Arrange a diagnosis
Problem 07
Sparking, Burning Smell or Tripped Breaker
Sparks around an element, a burning plastic smell or a breaker that trips when you turn on a burner usually point to a damaged element, a burnt receptacle, or a wiring fault. Turn off the stove at the breaker right away and don't use it until it has been checked. If you ever smell gas near a stove, don't touch any switches; leave the home and call your gas utility from outside.
Arrange a diagnosis
Models we work on
Types of Stoves and Cooktops Our Skilled Technicians Can Fix
Share your brand and model when you get in touch so we can confirm service availability.
Electric coil stoves
Smooth-top glass ranges
Induction cooktops
Freestanding ranges
Slide-in ranges
Built-in cooktops
Double-oven ranges
Why call usDiagnosis first Practical guidance Local availability
Real answers before repair begins.
Our local process keeps you informed from first contact to final decision.
We explain the repair and whether it makes sense for your stove.
Edmonton, Sherwood Park, Acheson, Spruce Grove and surrounding areas.
Our services
Appliances We Repair
Helpful answers
Stove and cooktop repair FAQs
Clear answers before you schedule a visit.
How much does stove repair cost in Edmonton?
The cost depends on your stove's brand, the faulty part, and how complex the repair is. After diagnosing the problem, our technician gives you a clear estimate before any work begins, so there are no surprises.
Do you offer same-day stove and cooktop repair services?
Yes. A stove that won't work disrupts every meal, so Dr. Appliance Fix offers prompt, local same-day or flexible appointments - including Sundays - across Edmonton, Sherwood Park, Spruce Grove, and Acheson. Many stove and cooktop repairs are completed during the same visit, depending on the issue and parts availability.
Which stove and cooktop brands do you repair?
We repair most major stove and cooktop brands, including Whirlpool, GE, Samsung, LG, Frigidaire, KitchenAid, Bosch, Maytag, and many others. Share your brand and model when you book so we can come prepared.
Can a cracked glass cooktop be repaired?
A cracked glass cooktop can't be safely patched, but in most cases the glass top can be replaced as a complete panel. Our technician checks your model, part availability and the condition of the rest of the stove, then recommends the most practical option.